Materials Testing and
Modeling Lab - This is a fatigue testing
facility that was established in 2001, in the Department of Mechanical
Engineering, as a result of a DOE ERLE (Energy Related Lab Equipment)
grant. The lab currently contains
several fatigue test cells of different capacities. Current effort is underway to provide
thermo-mechanical fatigue testing capabilities.
The lab was established to serve educational and academic research needs
as well as collaborative research and service in the area of materials testing,
characterization and development of materials constitutive modeling.
For more details of existing capabilities, please contact Jeries Abou-Hanna.
Class Use – Lab Activities:
Class lab activities need to be scheduled at least 8 weeks in advance in order to ensure proper preparation of equipment for the specific lab exercises. It is assumed that for such lab activities the faculty member and/or the teaching assistants will be the users of the equipment. Consequently, they need to go through training. If you have such needs, the first step would be to complete the User Application form, and follow the General Procedure outlined below.
Operating Guidelines for Users
General Procedures:
- Discuss test needs, sample type, test type, and understand what equipment options are available for your needs with the Lab Director, Dr. Abou-Hanna (X2725).
- Complete a User Application form and submit it to Dr. Abou-Hanna.
- Discuss and schedule for training on the specific test cell for the specific test. The trainer will be identified by the Lab Director, depending on the type of test and the equipment.
- Read and follow Safety Procedures
- Have the trainer set up and run one test.
- Make sure the Chiller system is turned on
- Make sure that the cooling system is hooked up to the pump.
- Follow operating procedures of the specific test equipment.
- Keep a log of all the calibration data on the onset of each test.
- Notify Dr. Abou-Hanna of the test schedule and make sure that you have another person present in the lab when you are conducting the experiment.
- Keep all tools and personal belongings away from test cell.
- DO NOT LEAVE THE TEST UNATTENDED UNTIL you are sure that the test is running smoothly, and the controller interlocks and safety features are all activated.
- If you are running a test, turn on the red light (coming soon) located on top of the entrance door to indicate that equipment is running and lab entry must be authorized by the Lab Director.
- Users need to check in and out by
using the log sheet posted on the Lab door.
Safety:
For Safety guidelines, refer to Safety Rules for MTAM Lab.
Maintenance:
Report any maintenance issues such as malfunctioning equipment and hydraulic fluid or water leaks to Dr. Abou-Hanna at 677-2725. In case of an emergency, or if you cannot reach Dr. Abou-Hanna, contact Mr. Dave Miller in the Mechanical Engineering Shop at 677-2736, or call University Maintenance at 677-2915 and report the emergency.
Alterations and Upgrades:
Alterations and modifications to equipment require prior approval from the Lab Director.
Lab Charges and Rates:
Lab use for projects that involve external agencies will require a financial arrangement. The rates depend on many factors, mainly test period & test type. The Lab Director will provide the user an estimate of cost based on University sanctioned rates.
Academic use for projects that are not funded and are not for external clients carries no charge.
Lab Access:
Use of the facilities needs to be arranged by completing a User Application form. The user is expected to use only the equipment agreed upon in the User Application form. If additional equipment is required, then the user needs to contact the Lab Director and request an amendment to the initial agreement.
Hours of Use: The work in the lab must be during normal hours 8:-5: to ensure the personnel are available in case of an emergency or equipment malfunction. Special arrangements can be made if working after-hours is required, and the project faculty advisor will need to assume responsibility and be familiar with the test and the equipment and supervise the work. Fatigue tests may go on for days at a time, and they may require frequent monitoring by users. In such case, users should be able to enter the lab after hours ONLY to monitor and record data.
Reporting Problems:
Report problems to the Lab Director. In case of emergency, contact Mr. Dave Miller at 677-2736 during normal hours, or University Maintenance at 677-2915.
Lab Director Contact Information:
Jeries Abou-Hanna
Jobst 106
(309) 677-2725