Dr.Desh Paul Mehta (Paul)
6200,N.Fieldtree Ct.
Peoria,Illinois-61615
(309) 689-1900(Home)
(309) 677-2754(Office)
Education:
Ph.D. Iowa State
University, 1980
M.S.
Kansas State University, 1967
M.S.
Aligarh University, 1961
B.S.
Punjab University, 1959
Scholastic Achievements:
O.G.P.A. for M.S. (Mechanical Engineering) at Kansas
State University was 4.00/4.00. Election to Phi Kappa Phi both at Kansas
State University and Iowa State University.
Winner of "Best Research Paper,Award" for 1980 from ASHRAE
(American Society of Heating, Refrigerating and Air-Conditioning
Engineers).
Recipient of Rothberg Professional Excellence Award at Bradley
University for the year 1994.
Experience:
January 1978-to-date. Currently Professor and
Chairman(promoted from Associate Professor in August, 1982), Department
of Mechanical Engineering.Bradley
University, Peoria, Illinois. Responsible for the development
of courses and research projects in the areas of HVAC(Heating,
Ventilating, and Air-conditioning) systems;Energy Management;
Demand side Management; Thermodynamics, Instrumentation and
Control; Design of MicroMicroprocessor Based Systems; and
Materials Science.
November 1975 - January 1978. Instructor/Research
Assistant,
Department of
Mechanical Engineering, Iowa State University, Ames, Iowa.
Responsible for carrying out research in the areas of Energy
Conservation, Human Thermal Comfort, and Control Dynamics for
the projects sponsored by the Iowa Energy Policy Council and
ASHRAE; and for teaching courses in the area of Thermodynamics,
Instrumentation and Control Systems while pursuing studies for
a Ph.D. degree.
July 1962 - November 1975. Associate Professor
(promoted from Assistant Professor in November, 1967),
Department of
Mechanical University, Pant Nagar University, India.
Responsible for the development of courses and research in the
area of Instrumentation, Automatic Controls, Materials Science,
HVAC (Heating, Ventilating and Air-Conditioning) Systems,
Thermodynamics, and Thermal Energy Systems, for participating
in teaching in related mechanical engineering courses and for
the direction of research in Solar Systems Design.
July 1961 - July 1962. Lecturer, D.A.V College, Amritsar, India.
May 1961 - July 1961. Senior Research Assistant.
Punjab
Irrigation and Power Research Institute, Amritsar, India.
Additional Experience:
January 1978 - to date
*Graduate Advisor
and Major Professor for thity-five graduate students.Supervised their
Thesis/projects programs in the area of HVAC & R,instrumentations and
control systems, materials science, energy systems, and demand
side management.
*Guided thirty-four Senior Design Projects.
*Implemented an undergraduate
digital mesurement and control system laboratory with two funded
projects from the National Science Foundation.
*Initiated, developed and taught
the following new courses at Bradley University.
a, ME 441 - Mechanical Control Systems (UG)
b, ME 537 - Building Energy Management (G/UG Elective)
c, ME 544 - Mechanical Systems Analysis (UG/G)
d, ME 547 - Fluid power Control Systems (G)
e, ME 691 - Advanced HVAC Systems (G/UG)
f, ME 591 - Energy Management Systems (G)
g, ME 536 - Industrial Pollution and Prevention (G)
*Faculty Advisor for ASME and
ASHRAE.
*Served on the University-Curriculum
Committee, University Resource Committee, Sabbatical Leave Committee,
Rothberg Prof. Excellence Award Committee, University Research Excellence
Committee, College Research Committee, Computer Advisory Committee,
College Academic Policy Committee
and University Continuing Education Committee, and University Senate, and
Several Search Committees for Deans and Directors.
July 1967 - July 1971. Officer in charge.
Instrumentation
Center at Pant Nagar University, India. Responsible for testing,
installation, calibration, repair, and maintenance of instruments and
equipment received by Pant Nagar University from U.S.A. under U.S.A.I.D.
program, and for the development for various research projects in
accordance
with local parameters and conditions.
March 1971 - November 1975. Warden, University Hostel
at Pant Nagar, India. Responsible for the supervision of 50 employees
employed for various services to 500 students in the hostel, for providing
counsel and guidance to 500 students in the various aspects of life and
human relations.
July 1972 - July 1974. Staff Counselor, Engineering
Society,
Pant Nagar, India. Responsible for guidance for the professional
development of 800 student members of the Society.
July 1967 - July 1971. Officer-In-Charge. Engineering
Stores at
Pant Nagar, India. Responsible for the procurement, maintenance, and issue
functions of engineering stores.
July 1967 - November 1975. Acting Head; Department of
Mechanical Engineering at Pant Nagar University for a total period of two
years. Eighteen faculty members and 300 students.
Industry Experience at the following companies
in U.S.A. (1965-67):
Honeywell
Leeds and Northrup
Mettler
Nuclear-Chicago
Beckman
New-Brunswick Scientific Co.
Ivan Sovall, Inc.
Torsion Balances
International Equipment Company
Consulting
Experiences:
Tarai Development
Corporation, India, 1973. (Design of Energy Efficient Cold
Storage).
Ross TEMP. Mason City, Iowa,1978.
(Design and Development of Energy Efficient Cold
Storage).
Illinois Institute of Natural
Resources, Springfield, Illinois, 1980. (Energy Audits).
Local Churches in Peoria, Illinois,
1982. (Church Building Energy Audits).
Central Illinois Light
Company, Illinois, 1982. (Energy Systems Engineering).
Barber - Colman Company,
Rockford, Illinois, 1983. (Search for a suitable ceramic coating
material for improving the design of their carbon sensors).
Local Nursing homes in
Peoria, Illinois, 1983. (Energy Audits).
Central Illinois Light Company,
Illinois, 1984-87. (Ground Coupled Heat Pumps).
Peoria County. Peoria, Illinois, 1988.
(Energy
Analysis).
Central Illinois Light
Company, Illinois, 1991-98. (Demand Side Management).
Illinois Society of
Professional Engineers (ISPE), Springfield, Illinois. Review
Courses for the fundamentals and PE Exams. 1992-to-date.
Sponsored Research
Projects:
Principal Investigator and Project
Director of a research project entitled "Effects of Control Dynamics on
Energy Consumption in Building Environmental Control Systems". National
Science Foundation. $46,573. May 1981 - December 1983.
St. John Lutheran Church, Peoria, Illinois. $3,000 for research in
the area of audits. 1981
Principal Investigator and Project Director of a research project
entitled "Implementation of Undergraduate Digital Measurements and Control
Systems Laboratory". $38,930. September 1981 - March 1984
Grant-In-Aid from ASHRAE. To support one graduate student for
research on Control Dynamics one year. $4,800. 1982-1983
St. Paul's Cathedral, Peoria, Illinois. $2,000 for studies on building
energy utilization. 1982
The Lutheran Nursing Home and Retirement Facility, Peoria,
Illinois. $3,000 for research on human thermal comfort and energy
consumption. 1983
Central Illinois Light Co. Identification and Evaluation of Energy
Efficient Systems in Residential Buildings. $18,000 1984-87
India-US commision on Education. $18,000 to do research on Effects of
Energy Efficiency on Indoor Air Quality.
HECA grant for developing two new courses. $6,000. 1986-87
Principal Investigator and Project Director of a Project
entitled "Implementation of Undergraduate Modern Instrumentation
Lab" National Science Foundation. $47,000. 1988-91
Principal Investigator and Project Director of a contract with
Dr. Weinstein for Demand Side Management Studies. CILCO. $77,817.
1991-94
Principal Investigator and Project Director on Thermal Energy
Storage. CILCO. $11,500. 1992-93
Principal Investigator and Project Director of a research
project on the experimental Validation of an Ice Storage thermal
System. CILCO. $17,800 1993-94.
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $67,525. 1993-94
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $120,450. 1994-95
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $161,810. 1995-96
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $150,750. 1996-97
Implementation of Extended Audits. U. S. Department
of Energy.
$18,000. October, 1997
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $150,750. 1997-98
Funding for Test Equipment. U. S. Department of Energy. $7,000.
October 1998.
Development of Energy Efficient Designs. Illinois Department of
Commerce and Community Affairs. $106,636. April, 1998.
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $150,500. 1998-99
Implementation of Extended Audits. U. S. Department of Energy.
$15,000. 1998-99.
Energy Education Illinois Department of Commerce and Community
Affairs. $23,250. 1998-99.
Implementation of Heat Recovery Devices. U. S. Department of
Energy. $43,734. 1998-99.
Assistance for Research in Energy Efficiency. Graduate School at
Bradley University. $11,518. 1999-2000.
Director, Industrial Assessment Center (IAC) at Bradley University
U. S. Department of Energy. $152,500. 1999-2000
Membership in
Professional Societies:
* Member, American Society of
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE).
Secretary - Task group on Dynamic Response. (Now TC 4.6)
* Member, American Society of
Mechanical Engineers (ASME). Member, Advanced Energy Systems
Committee.
* Member, Association of
Energy Engineers (AEE).
* Member, American Society of
Engineering Education (ASEE).
Most Recent
Publications
"A Rational Model for Thermodynamic
analysis of Occupied Spaces", Proceedings of energy management conference,
Iowa state university, October 28-30, 1978. (Mehta, D. Paul, Woods, J. E.
and Brueck, D. M.)
"Dynamic Thermal Responses
of Building Systems". Ph.D. Dissertation, Iowa State
University, February 1980. (Mehta, D. Paul)
"Accuracy of an Analytical
Model to Predict Dynamic Thermal Responses of Building
systems". Proceedings of International Congress on Building
Energy Management. Poroa de Varzim, Portugal. Permagon Press,
1980. (Mehta, D. Paul, and Woods, J. E.)
"An Experimental Validation
of a Rational Model for Dynamic Responses of Buildings". ASHRAE
Trans 86, part 2, 1980. (Mehta, D. Paul, and Woods, J. E.)
"Applications of an
Analytical Model to Determine the Effects of Air Supply Rates
on Energy Consumption" . Advances in Energy Utilization
Technology, Proceedings of the 4th World engineering congress,
October 12-15, 1981, p. 78. (Mehta, D. Paul)
"Effects of Thermal
Insulation on the Dynamics of an Occupied Space in a Building
System". Journal of Thermal Insulation. Vol.5, October 1981.
(Mehta, D. Paul)
"Effects of Air Supply
Rates on Occupied Space Dynamics and Energy Consumption".
Journal of Energy Engineering AEE. Vol. 78, No.6, 1981, p. 43 (Mehta,
D. Paul)
"Insulation Measurements on
an Existing Building at Bradley University Campus". Fourth
International Conference on Thermal Insulation. Millbrae,
California, January 18-20, 1982.
"Validation of Envelope Thermal Characteristics for an
Existing Building". Journal of Thermal Insulation. Vol. 5,
1981. p. 173. (Mehta, D. Paul)
"Dynamic Effects of
Insulation on Energy Consumption in Buildings". Proceedings of the Third
European Conference on Building Materials. June 21-22, 1982, Nice, France.
(Mehta, D. Paul)
"Influence of Two Position Control Dynamics on Energy
Utilization in Buildings". Advances in Energy Productivity,
Proceedings of the 5th World Energy Engineering Congress,
September 14-17, 1982. Atlanta, Georgia. p. 69. (Mehta, D.
Paul)
"Effects of control
Dynamics on Energy Consumption in Residential Heating Systems".
Journal of Energy Engineering. AEE, Vol. 80 (3), 1983. (Mehta,
D. Paul)
"An Undergraduate Digital
Systems Laboratory". Proceedings of the Engineering Foundation
Conference. Henniker, N. H. July 25-29,1983. (Mehta, D. Paul)
"Microprocessors in an
Undergraduate Mechanical Engineering Laboratory". Frontiers in
Education conference. ASEE and IEEE. October 17-19, 1983.
(Mehta, D. Paul, and Max A. Wessler)
"Effects of Proportional
Control Dynamics on Energy Consumption in Environmental Control
Systems". Proceedings of the 6th World Energy Engineering
Congress, November 28 - December 2, 1983. Atlanta, Georgia.
(Mehta, D. Paul, and John E. Kharsa)
"Control Component Modeling in HVAC
Control and Simulation". Sponsored by ASHRAE and held at the Georgia
Institute of Technology. Atlanta, Georgia. February 2-3, 1983 (Mehta, D.
Paul)
"Microcomputers Based
Undergraduate Instruction for Mechanical Engineers". The Impact
of Information Technology on Engineering Education. Proceedings
of the Annual Conference of the European society for
Engineering Education. Erlangen, W. Germany, 1984. p. 325. (Mehta, D.
Paul, and Max A. Wessler)
"Control Component
Coupling in Environmental Control Systems" presented at the
Winter meeting of ASHRAE, Chicago, January 1985.
"Implementation of a Computer Controlled
Data Acquisition System for Performance Evaluation of a Heat Pump."
Proceedings of the Fourth International Conference on Systems Engineering.
Conventry; U. K. Sept. 9-11, 1985. p. 19-23.
"Implementation
of a Telecommunications Based Data Acquisition System for Evaluating
an Earth Coupled Heat Pump". Proceedings of the 2nd National
Conference on Microcomputer Applications for Conservation and
Renewable Energy (NCMACRE '86) Tucson, AZ. October 21-23 1986.
(Mehta, D. Paul, D. J. Rocke and D. C. Zietlow)
"Impact of Heat Pump Water
Heaters on Utility Companies and On Home Owners". Proceedings
of the 9th World Energy Engineering Congress. Atlanta, GA
October 22-24, 1986; p. 541. (Mehta, D. Paul, D. J. Rocke and D. C.
Zietlow)
"Dynamic Performance of PI
Controllers"/ASHRAE Technical Data BUlletin. Energy Management Strategies.
Vol. 3 No. 2. 1987. Pp. 90-108.(Mehta, D. Paul)
"Dynamic Performance of PI
Controllers Experimental Validation". ASHRAE Trans: 94, Part 1;
New York, N. Y. January 18-21, 1987. p. 1775.(Mehta, D. Paul)
"Personal Computer Based
Data Acquisition Systems for Mechanical Engineers". Proceedings
of the 1998 Annual Conference. American Society for Engineering
Education. Portland, Oregon. June 19-23, 1998. (Mehta, D. Paul)
"Microprocessors in
Undergraduate Instrumentation Lab in Mechanical engineering" .
Proceedings of the 1998 Annual conference. American Society for
Engineering Education. Portland, Oregon. June 19-23, 1998.
(Mehta, D. Paul)
"Use of Spread Sheets in
Energy Estimating Methods." ASHRAE Trans. 95 part 2. Ottawa,
Canada.June 26 - 28, 1988. (Mehta, D. Paul, with D. C.
Zietlow)
"Heat Pump Performance Evaluation".
Proceedings of the 11th World Energy Engineering Congress. Association of
Energy Engineers, Atlanta, GA October 19-21, 1988 p. 293.(Mehta, D. Paul,
with D. C.
Zietlow)
"Energy
Engineering Handbook,Fairmont Press, 1989. (Mehta, D. Paul, and Thumann,
Albert)
"Interfacing Personal
Computers to Microprocessors-Based Data Acquisition Systems",
COED Journal, ASEE (3), July 1989.pp. 17-23. (Mehta, D. Paul)
"Energy Efficiency in
Buildings through Automatic Controls". Proceedings of the 12th
World Energy Engineering Congress. Association of Energy
Engineers. Atlanta, GA, October 25-27, 1989. (Mehta, D. Paul)
"Modeling of Thermal Dynamic Responses
of Occupants in Controlled Environments". Advances in Bioengineering. The
American Society of Mechanical Engineers. November 1990.p. 281. (Mehta, D.
Paul)
"Energy Engineering
Handbook". 2nd Edition. Prentice Hall, June 1991. (Mehta, D. Paul, and
Thumann, Albert)
"Implementation of
Undergraduate Modern Instrumentation Laboratory for Mechanical
Engineers". Proceedings of the 1992 Annual Conference of
American Society for Engineering Education. Toledo, OH, June
1992. (Mehta, D. Paul)
"Repair/Replacement of
Existing Air-Conditioning System at St. Paul Cathedral". A
Report Prepared for CILCO, December 1992. (Mehta, D. Paul)
"On site Evaluation of Potential
Thermal Energy Storage (TES) Program Participation by Seven Local
Facilities". A Series of Reports Prepared for CILCO. December 1992.
(Mehta, D. Paul)
"Feasibility Analysis for
Thermal Energy Storage (TES) System at Grace Presbyterian
Church". A Report Prepared for CILCO. May 1993. (Mehta, D.
Paul)
"Feasibility of Using
Window Type Heat Pumps at Sterling Towers". A Report was
Prepared PHA. July 1993. (Mehta, D. Paul)
"An Experience on Computer Control of Microprocessor Based Data
Acquisition for Mechanical Engineers". Proceedings of the First
International Conference on Mechanical Engineering Advanced
Technology for Industrial Production. MEATIPI, ASSUIT, EGYPT. December
27-29, 1994. pp. 583 - 593(Mehta, D. Paul)
"Energy Conservation for Small and
Medium Sized Manufacturers in Illinois." Vols. 16 - 45. U.S. Department of
Energy. 1994 - 95 (Mehta, D. Paul, and EADC Students).
"Energy Conservation and Waste
Minimization for Small and Medium Sized Manufacturers in Illinois." Vols.
46 - 75. U.S. Department of Energy. 1995 - 96 (Mehta, D. Paul, and IAC
Students).
"Air is not free for agile
Manufacturing", International Journal of Agile Manufacturing. Vol 1(2).
1998, pp 91 - 98. (Mehta, D. Paul)
"Energy Conservation and Waste
Minimization, and Productivity Enhancement for Small and Medium Sized
Manufacturers in Illinois." Vols. 76 - 100. U.S. Department of Energy.
1996 - 97 (Mehta, D. Paul, and IAC Students).
"Energy Engineering Handbook. Prentice
Hall. Fourth Edition. 1997. (Mehta, D. Paul with Albert Thuman)
"Energy Conservation and Waste
Minimization, and Productivity Enhancement for Small and Medium Sized
Manufacturers in Illinois." Vols. 100 - 125. U.S. Department of Energy.
1997 - 98 (Mehta, D. Paul, and IAC Students).
"Energy Conservation Analysis, Design
and Implementation." Justrite Mfg. Illinois Department of Commerce and
Community Affairs. 1999. (Mehta, D. Paul)
"Energy Conservation and Waste
Minimization, and Productivity Enhancement for Small and Medium Sized
Manufacturers in Illinois." Vols. 126 - 150. U.S. Department of Energy.
1998 - 99 (Mehta, D. Paul, and IAC Students).
"Implementation of Heat Recovery
Devices." Proceedings of the IAC Directors Meeting. Kennebunkport, ME,
August 9 - 11, 1999. (Mehta, D. Paul)
"Energy Conservation and Waste
Minimization, and Productivity Enhancement for Small and Medium Sized
Manufacturers in Illinois." Vols. 151 - 155. U.S. Department of Energy.
1996 - 97 (Mehta, D. Paul, and IAC Students).
"Waste Heat Recovery from a Low
Temperature Heat Source." Submitted to the Journal of Energy Engineering.
To be published in Vol. 97. No. 1, February, 2000 (Mehta, D. Paul)
"Energy Efficient Design of a Waste
Heat Rejection System." Submitted for Presentation at the Twenty-second
National industrial energy Technology Conference 2000 to be held on April
5-6, 2000 in Houston, TX. (Mehta, D. Paul)
"Utilizing Input Heat Source for
Optimal Operation of Chillers". Submitted for presentation at Twenty-third
World Energy Engineering Congress. November, 2000. Atalnta, GA. (Mehta,
D. Paul)
Public
Adresses
"Accuracy of an Analytical model to
predict Dynamic Thermal Responses of Building Systems".Proceedings of
the International Congress on Building Energy Mangement, Poroa de
Varzim, Portugal.Permagon Press, 1980(Mehta, D.Paul and Woods,
J.E.)
"An Experimental Validation of
a Rational model for Dynamic Responses of Buildings" ASHRAE
Trans 86,Part2, 1980(Mehta, D.Pauland Woods, J.E.)
"Applications of an Analytical
Model To determine the Effects of Air Supply Rates on Energy
Consumption". Advances in Energy Utilization Technology,
Proceedings of the 4th World Engineering Congress, October
12-15, 1981. (Mehta, D. Paul)
"Insulation Measurements on
an Existing Building at Bradley University Campus". Fourth
International Conference on Thermal
Insulation.Millbrae,CA,January 18-20,1982 (Mehta, D. Paul)
"Energy Efficiency Related Education
and Research at Bradley University". Mayors Energy Task Group.City of
Peoria, Peoria, IL.November, 1982. (Mehta, D. Paul)
"Dynamic Effects of Insulation on Energy
Consumption in Buildings". Proceedings of the Third European Conference on
Building Material, June 21-22, 1982, Nice, France. (Mehta, D. Paul)
"Influence of
Two-Position Control Dynamics on Energy Utilization in
Buildings". Advances in Energy Productivity, Proceedings of the
5th World Energy Engineering Congress, September
14-17,1982,Atlanta, GA. (Mehta, D. Paul)
"An Undergraduate Digital Systems
Laboratory". Proceedings of the Engineering Foundation Conference.
Henniker, N. H. July 25-29, 1983. (Mehta, D. Paul, and Max A. Wessler)
"Microprocessors in an
Undergraduate Mechanical Engineering Laboratory". Frontiers in Education
Conference. ASEE and IEEE. October 17-19, 1983.Worcester, MA. p. 115
(Mehta, D. Paul, and Max A. Wessler)
"ASHRAE Related Education
and Research at Bradley University". Central Illinois Chapter
of ASHRAE. Peoria, IL September 5, 1983(Mehta, D. Paul)
"Control Component Modeling in HVAC
Systems". Proceedings of the workshop on HVAC controls and simulation.
Sponsored by ASHRAE and held at the Georgia Institute of Technology.
Atlanta, GA. February 2-3, 1984. (Mehta, D. Paul)
"Microcomputers Based Undergraduate
Laboratory Instruction for Mechanical Engineers". The Impact of
Information Technology on Engineering Education. Erlangen, W.Germany,
August 1984. p.235 (Mehta, D. Paul, and Max A. Wessler)
"Control Component Coupling in
Environmental Control Systems" presented at the Winter Meeting of ASHRAE,
Chicago, January 1985. (Mehta, D. Paul)
"Dynamic Performance
of PI Controllers Experimental Validation". ASHRAE Trans: 94, part 1, New
York, N.Y. January 18-21, 1987. (Mehta, D. Paul)
"Personal Computer Based Data
Acquisition Systems for Mechanical Engineers"; Proceedings of
the 1998 Annual Conference.American Society for Engineering
Education, Portland, Oregon.June 19-23, 1988.(Mehta, D. Paul)
"Microprocessors in an Undergraduate
Instrumentation Lab in Mechanical Engineering". Proceedings of the 1998
Annual Conference. American Society for Engineering Education. Portland,
Oregon.June 19-23, 1988.(Mehta, D. Paul)
"Use of Spread Sheets in Energy Estimating Methods".
ASHRAE Trans.95 Part-2. Ottawa, Canada. June 26-28, 1988.(Mehta, D. Paul
with D.C.Zietlow)
"Heat Pump Performance
Evaluation". Proceedings of the 11th world energy engineering
congress. Association of Energy Engineers, Atlanta, GA. October
19-21, 1988.(Mehta, D. Paul and D.C.Zietlow)
"Energy Efficiency in
Buildings Through Automatic Controls". Proceedings of the 12th
World Energy Engineering Congress. Association of Energy
Engineers, Atlanta, GA. October 25-27, 1989.(Mehta, D. Paul)
"Modeling of Thermal Dynamic
Responses of Occupants in Controlled Environments". Advances in
Bioengineering. The American Society of Mechanical Engineers. November
1990.p.281 (Mehta, D. Paul)
"Implementation of
Undergraduate Modern Instrumentation Laboratory for Mechanical
Engineers". Proceedings of the 1992 Annual conference of
American Society for Engineering Education. Toledo, OH, June
1992. (Mehta, D. Paul)
"Air is Not Free for Agile
Manufacturing"; Proceedings of the International Conference on
Agile Manufacturing, ICAM, Lafayette LA, February 23-25, 1997.(
Mehta, D. Paul)
"Energy Conservation Analysis, Design
and Implementation." Justrite Mfg. Illinois Department of Commerce and
Community Affairs. 1999. (Mehta, D. Paul)
"Implementation of Heat Recovery
Devices." Proceedings of the IAC Directors Meeting. Kennebunkport, ME,
August 9 - 11, 1999. (Mehta, D. Paul)
Community Service:
Vice-President, India Association of Peoria.(1995-96)
President, India Association of Peoria.(1996-97)
Member, "City of Character" Task Group appointed by
the Mayor. (October 1997-To date).
Commissioner,City of peoria Police and Fire Commission,
nominated by the Mayor and appoited by the Peoria City Council.
(October 1997-To date).
Bradley University's Home
Page
Back
to my Homepage
Industrial Assessment
Center